Home / Jindi SMS / SMS Hardware / 短信猫 / M1806N-NC5

Jindi Ethernet port 4G full Netcom SMS cat M1806N-NC5

M1806N-NC5

Jindi M1806N-NC5 is a network port 4G full Netcom SMS sending and receiving device, embedded super network port, supporting TCP Client, TCP Server, UDP Client, UDP Server four working modes.

Jindi M1806N-NC5 supports the use of IP+PORT mode, and also supports the use of virtual serial port through software, which solves the problem that the PC software cannot communicate with the networked equipment as a serial port. Automatic connection when the network is disconnected to prevent packet loss caused by power failure and network disconnection. Embedded industrial-grade 4G full Netcom module, supporting the three major operators of China Mobile, China Unicom and China Telecom, compatible with 4G/3G/2G SIM cards, supporting seven modes and eighteen frequency bands, it can truly achieve blind plugging of any SIM card, full Netcom, and the whole network.

When the network is abnormal, the built-in Super Ethernet port can continuously try to re-establish the connection until the network is restored, so there is no need to worry about network disconnection, and the network will be automatically restored without manual intervention. The built-in watchdog function ensures 24-hour stable operation of the equipment without downtime. The purpose of design is to automate and intelligentize everything.

Jindi M1806N-NC5 is mainly used in networked and virtualized environments. Connect HUB, switch, router and other network equipment through network cables, and can access LAN, Internet, docking servers, virtualization servers, private clouds and other intranet or Internet environments.

Main parameters:
Main parameters: performance remark
minimum Typical maximum
Operating Temperature (°C) -20 25 +55  
Storage Temperature (°C) -25 25 +85
Operating Voltage(V) 5.0 5.0 16 ≥5.0V can guarantee the output power
SMS sending speed 2 seconds/piece  
Serial baud rate (bps) 9600,19200,38400,57600,115200,230400 The factory default baud rate is 115200bps
Serial port parameters None/8/1  
 
Network Protocols:
Main parameters: description remark

 

Band

LTE(FDD)B1/B3/B5/B8

LTE (TDD) B38/B39/B40/B41

WCDMA Band B1/B3/B5/B8

TD-SCDMA B34/B39

GSM/GPRS/EDGETriBand850/900/1800

CDMA2000 1X/EVDO BC0

 

 

Support mobile, China Unicom, telecom, support foreign use,

The device can automatically search for the frequency, which can also be set by AT command

Network protocols IP、TCP、UDP、DHCP、DNS、HTTP、ARP、ICMP、Web socket  
Working mode TCP Server/TCP Client/UDP Server/UDP Client Default working mode: TCP Server

 

How the IP was obtained

 

Static IP address, DHCP

Factory default IP: 192.168.0.7

Default subnet mask: 255.255.255.0

Default gateway: 192.168.0.1

Default local port: 23

data format Text/PDU  
AT Command Support for standard AT instruction set (Hayes 3GPP TS 27.007 and 27.005)  

 

Interface parameters:

Hardware interfaces description remark
Data interface RJ45 network port 10/100Mbps, cross-connect adaptive
SIM card interface 3v/1.8v  
Antenna interface 50Ω characteristic impedance SMA antenna connector
Power connector 5.5*2.1 round head DC power supply  
Specifications:
Physical characteristics description remark
Housing material metal DIN rail mounting
Dimensions(mm) 114*55*25 Accessories are not included
Weight (g) 120 Accessories are not included
fittings Power adapter, network cable, antenna
1806N-NC5_1
1806N-NC5_2
1806N-NC5_3
1806N-NC5_4
1806N-NC5_5
1806N-NC5_6
1806N-NC5_7
1806N-NC5_9
主要参数 性能 备注
最小值 典型值 最大值
工作温度(℃) -20 25 +55  
存储温度(℃) -25 25 +85
工作电压(V) 5.0 5.0 16 ≥5.0v可保证输出功率
主要参数 描述 备注
频段 LTE(FDD)B1/B3/B5/B8
LTE (TDD) B38/B39/B40/B41
WCDMA Band B1/B3/B5/B8
TD-SCDMA B34/B39
GSM/GPRS/EDGETriBand850/900/1800
CDMA2000 1X/EVDO BC0
支持移动、联通、电信,支持在国外使用,
设备可自动搜寻频率,也可以通过AT指令设置
网络协议 IP、TCP、UDP、DHCP、DNS、HTTP、ARP、ICMP、Web socket  
工作模式 TCP Server/TCP Client/UDP Server/UDP Client 默认工作模式:TCP Server
IP 获取方式 静态IP、DHCP 出厂默认IP:192.168.0.7
默认子网掩码:255.255.255.0
默认网关:192.168.0.1
默认本地端口:23
数据格式 文本/PDU  
AT指令 支持标准AT指令集(Hayes 3GPP TS 27.007和 27.005)  
短信发送速度 2秒/条  
串口波特率(bps) 9600,19200,38400,57600,115200,230400 出厂默认波特率115200bps
串口参数 None/8/1  
硬件接口 描述 备注
数据接口 RJ45网口 10/100Mbps、交叉直连自适应
SIM卡接口 3v/1.8v  
天线接口 50Ω特征阻抗 SMA 天线接头
电源接口 5.5*2.1圆头直流电源  
物理特性 描述 备注
材质 金属 DIN 导轨安装
外形尺寸(mm) 114*55*25 不包括配件
重量(g) 120 不包括配件
配件 电源适配器,网线,天线

指示灯

指示灯状态 状态说明
不亮 没有开机或没有供电
常亮 没插SIM卡,信号不好或找不到网络
快闪 工作状态,发短信或打电话

信号强弱判断

AT+CSQ返回结果 信号质量
14~31 可以正常工作
0~13 和 +99 信号不够,不能正常工作
1806N-NC5_10
1806N-NC5_11
1806N-NC5_12
1806N-NC5_15
1806N-NC5_21
1806N-NC5_22
1806N-NC5_23
1806N-NC5_24
中关村高新技术企业证书
1806N-NC5_25